Document: OZM-VSI-001 | Draft Version 1.0
By checking in and entering this site, you acknowledge that you have read, understood and agree to comply with the following conditions.
1. GENERAL SITE REQUIREMENTS
All visitors and contractors must sign in upon arrival and sign out before leaving the site.
Follow all site safety rules, procedures, signage and instructions issued by authorised warehouse personnel.
Wear appropriate PPE wherever required, including high-visibility clothing and safety footwear in designated operational areas.
Remain within authorised areas and be accompanied by an authorised employee where required.
Use mobile phones only where it is safe to do so.
Smoking, vaping, alcohol and illegal drugs are prohibited on site.
Report all hazards, incidents, injuries, near misses and unsafe conditions immediately.
Keep emergency exits, firefighting equipment and assembly areas unobstructed.
Photography, video recording and disclosure of confidential information require prior authorisation.
2. FORKLIFT AND MOBILE EQUIPMENT SAFETY
CRITICAL SAFETY REQUIREMENT: MINIMUM 3-METRE CLEARANCE
A minimum clearance distance of 3 metres must be maintained from operating forklifts and mobile plant, in accordance with site safety procedures.
Never approach or walk beside, behind or in front of a moving forklift.
Never enter the path of a forklift. Make eye contact with the operator and wait for a clear signal before proceeding, and only where it is safe and authorised to do so.
Always use designated pedestrian walkways where provided.
Give way to forklifts and mobile equipment in accordance with site traffic management rules.
Remain alert to reversing alarms, warning lights and vehicle movements.
Do not enter forklift operating zones unless specifically authorised and safe to do so.
3. CONTRACTOR REQUIREMENTS
Contractors must hold and maintain all licences, permits, qualifications, certifications and insurance required for their work.
Contractors must complete all applicable site inductions before commencing work.
High-risk work must not commence until all required permits, approvals and risk assessments have been completed.
Contractors must use appropriate equipment and safe work procedures and comply with applicable workplace health and safety requirements.
4. VISITOR & CONTRACTOR ACKNOWLEDGEMENT
By submitting this registration, you confirm that:
You are fit to enter the site and are not impaired by alcohol, drugs, fatigue or any condition that could compromise safety.
You have read and understood these Conditions of Entry.
You agree to comply with all applicable site safety requirements.
You acknowledge the requirement to maintain the designated minimum 3-metre clearance from operating forklifts and mobile equipment.
You agree to follow instructions provided by authorised site personnel.
IMPORTANT NOTICE
Failure to comply with these Conditions of Entry may result in removal from the site and/or suspension of access privileges.